Decathlon™ CCL oils are fully synthetic chain lubricants for E-Coat paint lines and water-based paint systems. These adherent lubricants were developed for chain lubrication of overhead and floor conveyors where lubricants might get into the paint bath. Wear is avoided by the presence of special anti-wear additives. Decathlon CCL will substantially reduce lubricant consumption, lowering cost per operating hour and reducing service intervals for maintenance downtime.

VIEW DETAILS

Decathlon™ HTC oils are recommended when deposits such as carbon and varnish are not tolerable. The thin film evaporation characteristics of HTC oils are excellent. However, an even more crucial issue is residue. Carbon deposits and varnish cause wear; not only these oils not cause these deposits, if equipment is currently suffering from this contamination, the natural detergency of HTC oils will loosen and dissolve it.

VIEW DETAILS

Earthkeeper® WRL penetrates to the core, ensuring that the rope is lubricated throughout. The biodegradable wire rope oil is treated with additives that enhance anti wear capabilities and even provide a degree of extreme pressure protection. With Earthkeeper WRL, downtime for rope changes is reduced and production is increased.

VIEW DETAILS

Medallion™ Penetrating Chain Oil is a multi-purpose, light lubricating oil which can be used as a lubricant, penetrating oil and anti-rust film on equipment and parts where there is possible contact with edible products. It is NSF Registered for H-1 and Kosher Approved. Medallion Penetrating Chain Oil is ideal for use on conveyor chains operating at temperatures from -40° F (-40° C) to 180° F (80° C).

VIEW DETAILS

Open Chain Lubricant is a penetrating chain oil specifically designed to meet the exacting lubrication requirements of chain drives. It's penetrating action draws the lubricant to the pins and bushings of a chain where lubrication is most needed. It quickly displaces moisture and contaminants, while preventing rust and corrosion. Open Chain Lubricant is suitable for high loads.

VIEW DETAILS

Renew™ protects the strands and sheaves on wire ropes from friction and wear, this increases wire rope life while decreasing downtime for change-outs; the final result is more production and less cost. Renew is specially formulated to penetrate to the core of the rope, thus, it lubricates inner rope strands, leaving a nondrying, nontacky film on the rope exterior.

VIEW DETAILS

Wire Rope Lubricant quickly penetrates to the core. This ensures that the rope is lubricated throughout while providing a nondrying, nontacky film on the outside of the rope which protects outer strands from corrosion as well as lubricating the wire rope drums and sheaves.

VIEW DETAILS

Decathlon™ synthetic air compressor lubricants are manufactured from the finest synthetic hydrocarbon, diester and sophisticated air systems manufactured today. These lubricants provide excellent low temperature characteristics while maintaining their stability at elevated temperatures. Decathlon synthetic air compressor lubricants impart excellent resistance to oxidation demanded by the sophisticated air systems manufactured today. Use where OEM recommends PAO synthetic oil Use on screw compressors where discharge temperature is above 190°F (88°C).

VIEW DETAILS

Decathlon™ synthetic air compressor lubricants are manufactured from the finest synthetic hydrocarbon, diester and sophisticated air systems manufactured today. These lubricants provide excellent low temperature characteristics while maintaining their stability at elevated temperatures. Decathlon synthetic air compressor lubricants impart excellent resistance to oxidation demanded by the sophisticated air systems manufactured today. Use where OEM recommends PAO synthetic oil Use on screw compressors where discharge temperature is above 190°F (88°C).

VIEW DETAILS

Hyperion™ Synthetic Blend oils bring together several developments in both base oil and additive technology to create a true multifunctional product. These zinc-free, anti-wear, hydraulic oils meet the needs of today's high precision hydraulic systems, turbines and air compressors.

VIEW DETAILS

Medallion Synthetic Air Compressor Oils are NSF Registered for H-1 and formulated using the finest PAO (polyalphaolefin) base stocks available. These oils impart excellent resistance to oxidation demanded by the sophisticated air systems manufactured today. Medallion Synthetic Air Compressor Oils provide outstanding high temperature stability, longer rain intervals and clean operation of equipment.

VIEW DETAILS

Refrigeration Compressor Oil is based on extremely low wax naphthenic oil for use where an uninhibited oil is required. It is recommended for use in refrigeration compressors using ammonia, CFC (chlorofluorocarbon) and HCFC (hydrochlorofluorocarbon) refrigerants such a R-11, R-12, R-13, R-113, R-114, R-115, R-22, R-123, R-141b, R-142b, R-717, R-500, R-501 and R- 502. It is not recommended for use with HFC (hydroflurocarbon) refrigerants such as HFC-134a (R-134a). Whitmore’s Refrigeration Compressor Oil is recommended for systems where the evaporator temperature ranges down to approximately -35°F or -37°C.

VIEW DETAILS

Caliber™ 460 M is a robust, lithium complex grease containing molybdenum disulfide (MOS2). It's designed to lubricate components of heavy-duty equipment and rolling stock. Caliber 460M provides extended service intervals and reduces wear.

VIEW DETAILS

Ideal for heavy earthmoving and industrial equipment, the Caliber™ Blue series is perfect for heavy-duty plant lubrication, high load applications and applications involving extreme pressure. This performance grease reduces downtime and replacement costs by protecting equipment against scoring and high shock load conditions. Caliber Blue excels in warm climates.

VIEW DETAILS

Caliber™ 3M & 5M meet the original Caterpillar "MPGM" specification. These greases contain 3% and 5% molybdenum disulfide (MoS2). Caliber 3M and 5M greases are designed primarily for use in mining equipment, such as draglines and shovels, drills, earthmoving equipment, and other heavy-duty rolling stock applications. These greases are perfect for wheel and slewing bearings, chassis points and U-joints, as well as pivot points and bucket pins. It forms a protective barrier to reduce wear and extend lubricant life, reducing parts replacement and downtime.

VIEW DETAILS

The most robust, lithium-based, bearing grease in the Whitmore lubricant line. This extreme pressure grease is designed for heavy duty applications. Whitmore recommends this product where the most severe, high and shock loads are encountered. Ideal for warm climates.

VIEW DETAILS

DET-900 is a stable, nonflammable, chemically inert grease designed for use in any grease-lubricated applications where high temperatures, chemicals or radiation creates difficulties. Also suitable where very long lubricant life is required, DET-900 will prove serviceable for continuous temperatures up to 400°F (204°C) with minimal re-lubrication. These grease can withstand temperatures up to 575° F (300°C).

VIEW DETAILS

Dura-Film™ XD is a calcium sulfonate grease with fully synthetic oil designed to protect equipment under the most severe conditions of high load, shock load, water and chemical attack. The base fluid is a blend of synthetic polyalphaolefin (PAO) oils for ease of pumping at low temperature. The addition of synthetic polymers gives adhesion to metal. Dura-Film XD is very robust and pumpable in cold climates, down to -20°F (-29°C).

VIEW DETAILS

Earthkeeper® EP is a biodegradable, high performance lubricating grease based on calcium sulfonate thickener and a blend of semi-synthetic biodegradable oils. This extreme pressure grease is suitable for a wide range of applications, including equipment under severe load, shock load and vibrations.

VIEW DETAILS

Earthkeeper® WRL penetrates to the core, ensuring that the rope is lubricated throughout. The biodegradable wire rope oil is treated with additives that enhance anti wear capabilities and even provide a degree of extreme pressure protection. With Earthkeeper WRL, downtime for rope changes is reduced and production is increased.

VIEW DETAILS

GearMate® 1000 contains a high molecular weight polymer extender that resists drying, oxidation and thermal decomposition. This is extremely helpful in areas of high dust contamination or when typical weather conditions can cause peeling and flaking from sticks, gears, and circle rails. Whitmore's blend of solid and oil-soluble anti-wear additives provides superior load carrying ability and high performance wear resistance in an environmentally safe package.

VIEW DETAILS

Whitmore's toughest lubricant recommended for use on draglines and shovels. This lubricant contains a high molecular weight polymer that resists drying, oxidation, and thermal decomposition. It does not emulsify in water, making it ideal for components exposed to rain, ice and snow, and in many areas, a single grade can be used year-round. GearMate 1000ICT is enhanced with an improved coating technology that establishes a dark, non-transparent coating on metal so operators can easily identify the lubricant is in its correct place and quantity.

VIEW DETAILS

Nowhere is grease pumpability more important than on mining machines such as draglines and shovels. The lubrication lines are long, the temperature can drop to deep freeze conditions, and in many parts of the world the machines don’t stop in cold weather. Legacy M will pump to the boom point sheave bearing at -50 degrees F (-46°C). The thickener, synthetic oil and polymer in Legacy M have been selected with ease of pumping in mind, yet without sacrificing performance in summer conditions. For all but the hottest climates, this is an ideal high-performance multipurpose grease. This grease is highly water-resistant and suitable for use where low temperatures or water are present.

VIEW DETAILS

Whitmore’s best bearing grease for demanding applications. Matrix® EP protects in difficult lapplications and conditions far beyond conventional grease. It protects against heat, high load, corrosion or infrequent lubrication. Matrix EP extends lubrication frequency using less grease, preventing premature wear.

VIEW DETAILS

Matrix® LC is a heavy-duty addition to the Whitmore line of extreme pressure greases. This grease answers demands for a calcium sulfonate complex grease that is pumpable in cold weather and is suitable for higher speed bearings (Matrix® “light” for higher speed bearings).

VIEW DETAILS

Medallion™ FM Grease is a premium, water-resistant, versatile extreme pressure lubricant which provides excellent protection from wear under a wide range of conditions, including heavy load and frequent washdowns. It is registered with NSF as an H-1 grease and Kosher Approved. This makes it suitable for use in food processing plants where incidental contact with food is possible.

VIEW DETAILS

Moly P is a multipurpose grease formulated to provide excellent lubrication to all phases of plant operations. It's specifically designed for wet applications. This diverse product utilizes a lithium/calcium, 12-hydroxy thickener which provides superior mechanical stability, water resistance, oxidation and corrosion resistance, as well as extreme pressure properties.

VIEW DETAILS

Novagard® is designed to lubricate anti-friction bearings and bushings. It is recommended for pivot points and bucket pins on earthmoving equipment, as well as vehicle chassis points and U-joints. Novagard® protects against shock loads, welding and scoring, resulting in fewer replacement parts and reduced downtime. Novagard® is recommended for cold climates, the softest grade can be used at -45°F (-43°C).

VIEW DETAILS

Novatemp™ is a high temperature grease designed to lubricate bearings, bushings and other sliding components at high temperatures when over extended re-lube cycles are unavoidable. At high temperatures, solids take over as the fluid portion evaporates. Novatemp contains almost 15% lubricating solids. After the base oil has evaporated, the MoS2 and graphite in this lubricant provide a laminating film that protects sliding and rolling machine elements.

VIEW DETAILS

Omnilith™ 360 is a lithium soap based grease designed for use in a wide range of applications. The lithium 12- hydroxystearic soap base provides high shear stability, low oil separation and low hardening tendency. These qualities allow for an extension of re-lubrication intervals, reducing lubrication costs. For temperature use up to 210°F (100°C).

VIEW DETAILS

Omnilith™ 500 is an extreme pressure grease suitable for use in severe applications across a wide variety of operating conditions including high load, moisture and a wide speed range. The lithium complex soap base allows for use at temperatures up to 450°F (232°C). Omnilith 500 EP 2 is the ideal choice as a multipurpose grease in the heavy-duty industry where extreme pressure or high temperature performance is required.

VIEW DETAILS

Omnitask® grease is designed for heavily loaded operations in the lower speed range and in all situations where high load, shock load and high vibrations can lead to premature component wear. To be an extremely effective extreme pressure (EP) package, Whitmore has added graphite and molybdenum disulfide (MoS2). The combination of high base oil viscosity, EP package and solid lubricants provides synergies that assure maximum protection from wear and seizure under the most difficult conditions.

VIEW DETAILS

Omnitemp® is specifically formulated to withstand the rigorous effects of high temperatures. Its non-melting base ensures that it remains in service when other greases would melt and/or run out. Omnitemp offers unmatched protection when high temperatures are a consideration; this is a benefit to industries involved in the production of paper, glass, brick and ceramics, as well as power generation, metal producing and processing. For use up to 400°F (200°C). Contains MoS2.

VIEW DETAILS

Onyx™ is an extreme pressure, calcium sulfonate complex grease is specifically designed for use on roughing and finishing mills where high resistance to water is essential. The thickener has natural ability to shut out water. This has been greatly augmented by the addition of water-repelling materials including special polymers.

VIEW DETAILS

Designed using the latest technology in extreme pressure/antiwear chemistry, SurStik® 800 is a high-performance, extreme pressure lubricant formulated for use on open gears. It works well in highly loaded components under the most punishing conditions and easily forms a protective film. SurStik 800 is highly resistant to being washed out. Meets Bucyrus specification.

VIEW DETAILS

Vortex™ is a durable and tacky coupling grease specifically formulated for long-term lubrication of greased grid and gear type mechanical couplings. This highly effective grease can be used in any size couplings, at all speeds, and in the presence of water and steam.

VIEW DETAILS

Medallion™ FM Gear Oils are appropriate for worm gear drives, oiled bearings, couplings and parallel-shaft gearboxes. These oils contain anti-wear additives to protect metal surfaces and reduce downtime due to component failure. Medallion FM Gear Oils are NSF Registered for H-1 and Kosher Approved enclosed gearbox oil for use in food machinery.

VIEW DETAILS

Medallion™ FM Grease is a premium, water-resistant, versatile extreme pressure lubricant which provides excellent protection from wear under a wide range of conditions, including heavy load and frequent washdowns. It is registered with NSF as an H-1 grease and Kosher Approved. This makes it suitable for use in food processing plants where incidental contact with food is possible.

VIEW DETAILS

Medallion™ FM Hydraulic Oil is ideally used in areas where a nontoxic oil is required. It is recommended for high-pressure hydraulic systems, as well as bearing lubrication wherever there is a chance of incidental contact with edible products. It is NSF registered for H-1 and Kosher Approved.

VIEW DETAILS

Medallion™ Mirkavac™ Food Machinery V/R Pump Oils are blended using a new generation food grade base oil called Excelsior™. Most base oils used in industrial lubricants are yellow or amber in color. This “discoloration” is caused by a variety of impurities including traces of sulfur, nitrogen and inferior aromatic oils. Nitrogen promotes oxidation and deposit formation. Aromatics have poor oxidation stability. Excelsior base oils are colorless and free of these materials. Excelsior oil is ideal for use in applications involving food machinery.

VIEW DETAILS

Medallion Synthetic Air Compressor Oils are NSF Registered for H-1 and formulated using the finest PAO (polyalphaolefin) base stocks available. These oils impart excellent resistance to oxidation demanded by the sophisticated air systems manufactured today. Medallion Synthetic Air Compressor Oils provide outstanding high temperature stability, longer rain intervals and clean operation of equipment.

VIEW DETAILS

Medallion™ White Anti-Seize is a premium quality assembly paste that provides excellent protection from seizure, galling, rust and corrosion. It has been registered with NSF as H-1 and is suitable for use in food processing plants where incidental contact with food may occur.

VIEW DETAILS

PF- 35 is a top of rail oil designed to provide consistent friction at the wheel-rail interface. Created for hump yards, it substantially reduces noise and wear, ensures that cars roll freely and prevents stop-shorts. This oil contains no solvents, water or metallic additives and will not corrode holding tanks, pumps or other applicator components.

VIEW DETAILS

TOR Armor® is a revolutionary top of rail friction modifier specifically designed to provide optimum friction at the wheel-rail interface, substantially reducing noise, wear and lateral forces. High lateral forces lead to loosened tie plates and fasteners and can result in low rail rollover; TOR Armor greatly reduces lateral creep, and when wheel creep occurs, it immediately increases positive friction, reducing the creep condition and returning the wheels to a healthy rolling motion. The result is a substantial reduction in vibrations, corrugations and high-frequency squealing. While TOR Armor is engineered for use on heavy haul freight and transit rail applications, it also acts as a lubricant during normal rolling.

VIEW DETAILS

Enclosed gear oils have been formulated to meet the unique demands of heavily loaded, industrial gearing systems. Claret™ contains molybdenum disulfide, a colloidal lubricant which provides extreme pressure protection under severe load and shock load.

VIEW DETAILS

Decathlon™ Extreme was created for use under adverse conditions, Decathlon Extreme meets the performance requirements of the American Gear Manufacturer’s Association (AGMA) specification 9005-D94. It performs in the harshest conditions, such as heavily loaded gears, shock loading and high temperatures due to hot, ambient conditions..

VIEW DETAILS

Decathlon™ F synthetic oil is an extreme pressure lubricant formulated to meet the exacting demands of enclosed gear systems including differentials, transmissions and industrial gearboxes. The properties of the synthetic (PAO) base oils reduce friction and power consumption when compared to petroleum based oils. Approved for use in gearboxes manufactured by Flender.

VIEW DETAILS

Decathlon™ HD is a fully synthetic, extreme pressure lubricant formulated to meet the exacting demands of most types of enclosed gear systems including differentials, transmissions and industrial gear boxes. The physical properties of the synthetic base stock reduces friction and power consumption when compared to petroleum based oils. Meets Bucyrus specification.

VIEW DETAILS

Decathlon™ PAG is a synthetic polyalkyl glycol oil specifically formulated to protect trunnion bearings on kilns and dryers and heavily loaded enclosed gearboxes operating at exceptionally high or low temperatures.

VIEW DETAILS

Synthetic components in GF 365 allow it to be used in temperature ranges from -40F (-40C) to 275F(135C). This lubricant reduces gearbox operating temperatures and helps dislodge the sludge that often remains from the previous use of inferior products.

VIEW DETAILS

Innerseal™ is and extreme pressue gear oil designed as a maintenance tool to assist maintenance planners in scheduling time-consuming repairs at appropriate, planned shutdown periods. Use Innerseal™ whenever gear case leaks become an exercise in constant refilling and needed maintenance cannot be scheduled immediately.

VIEW DETAILS

Medallion™ FM Gear Oils are appropriate for worm gear drives, oiled bearings, couplings and parallel-shaft gearboxes. These oils contain anti-wear additives to protect metal surfaces and reduce downtime due to component failure. Medallion FM Gear Oils are NSF Registered for H-1 and Kosher Approved enclosed gearbox oil for use in food machinery.

VIEW DETAILS

Multiplus® is an extreme pressure lubricant formulated to meet the exacting demands of most types of automotive differentials and transmissions including heavy-duty off-road fleets. It is designed to perform under adverse conditions such as; heavily loaded gears, shock loading and frequent reversing action.

VIEW DETAILS

Whitmore's work horse. This robust gear oil has been protecting gearboxes for over three decades. Paragon™ has earned a reputation for its long life, low foaming tendency and wear protection under high load.

VIEW DETAILS

The more difficult the application, the better Paragon Gold™ works. Its unique additive combination ensures smooth gear and bearing contact surfaces, even under the most punishing conditions of extreme load, reversing action and shock load. Paragon Gold is especially recommended for use where gears are pitted, scuffed or under unusually high load.

VIEW DETAILS

Earthkeeper® Hydraulic Oil is a premium quality, environmentally responsible hydraulic fluid designed to provide exceptional performance in both industrial and mobile hydraulic systems. This vegetable-based formulation satisfies the most rigorous criteria for biodegradability and low toxicity. Earthkeeper® Hydraulic Oil has the necessary anti-wear characteristics for hydraulic systems operating under high load and high pressure. It is also treated with additives that protect against rust and corrosion.

VIEW DETAILS

Hyperion™ Synthetic Blend oils bring together several developments in both base oil and additive technology to create a true multifunctional product. These zinc-free, anti-wear, hydraulic oils meet the needs of today's high precision hydraulic systems, turbines and air compressors.

VIEW DETAILS

Medallion™ FM Hydraulic Oil is ideally used in areas where a nontoxic oil is required. It is recommended for high-pressure hydraulic systems, as well as bearing lubrication wherever there is a chance of incidental contact with edible products. It is NSF registered for H-1 and Kosher Approved.

VIEW DETAILS

BMG-6000 is an open gear and bushing lubricant designed for use on the most severely loaded applications. It is especially useful where gears have previously been damaged due to severe load or poor lubrication. Pumpable at temperatures 32°F (0°C) or higher.

VIEW DETAILS

Decathlon™ Gold is the ultimate solution to the problem of lubricating open gears and very slow moving enclosed gears. It is a clean, environmentally-friendly, high viscosity synthetic oil that easily works with and protects even the most heavily loaded gears.

VIEW DETAILS

Earthkeeper® OGL is a biodegradable, highly effective open gear lubricant formulated using a high concentration of solid lubricants in combination with extreme pressure additives. It forms a robust film that protects from scuffing and pitting under the most punishing conditions.

VIEW DETAILS

When it comes to protecting heavily loaded open gears, Envirolube® stands out as the market leader in performance and quality. Envirolube has been recognized by OEMs and End-Users. No other open gear lubricant offers the protection from wear that is available from the Envirolube line. The combination of a dense protective film, plus special chemical extreme pressure additives ensures smooth operation, even on gears that operate under the most severe load conditions.

VIEW DETAILS

Envirolube® has been a market leader in open gear lubrication, extending the life of the most severely loaded gears. By using Envirolube Extreme, existing wear damage such as pitting or spalling is smoothed, restoring a smooth operating surface. The synergy created by the Extreme additive system reduces friction and wear to levels that were never thought possible. Friction reduction: 28.1%. Wear reduction: 28.5%.

VIEW DETAILS

Envirolube® XE is a proven, robust open gear lubricant used primarily on Ball Mills and Kilns. It is free of heavy metals and asphalt, instead Envirolube XE contains a blend of high viscosity petroleum distillate, synthetic polymer and resins. The advantage over asphalt is that the spent lubricant does not harden over time, this greatly simplifies cleanup. Envirolube® XE creates an effective layer of chemical and physical protection that prevents scuffing and pitting.

VIEW DETAILS

Envirolube® XE Extreme is Whitmore's most highly recommended open gear lubricant. Created by adding proprietary anti-wear technology proven in enclosed-gear applications, Envirolube XE Extreme takes open-gear wear protection to a revolutionary level. A market leader in open-gear lubrication, Envirolube XE Extreme extends the life of even the most severely loaded open gears. This lubricant smooths existing wear damage, restoring a smooth operating surface and ensuring cost savings through reduced friction, temperature and load.

VIEW DETAILS

GearMate® 1000 contains a high molecular weight polymer extender that resists drying, oxidation and thermal decomposition. This is extremely helpful in areas of high dust contamination or when typical weather conditions can cause peeling and flaking from sticks, gears, and circle rails. Whitmore's blend of solid and oil-soluble anti-wear additives provides superior load carrying ability and high performance wear resistance in an environmentally safe package.

VIEW DETAILS

Whitmore's toughest lubricant recommended for use on draglines and shovels. This lubricant contains a high molecular weight polymer that resists drying, oxidation, and thermal decomposition. It does not emulsify in water, making it ideal for components exposed to rain, ice and snow, and in many areas, a single grade can be used year-round. GearMate 1000ICT is enhanced with an improved coating technology that establishes a dark, non-transparent coating on metal so operators can easily identify the lubricant is in its correct place and quantity.

VIEW DETAILS

No other open gear lubricant offers the protection from wear that is available from Handi-Lube™. The combination of a dense protective film, plus special chemical extreme pressure additives ensures smooth operation, even on gears that operate under the most severe load conditions. Asphalt spray.

VIEW DETAILS

MillGuard™ is a high-viscosity fluid based on petroleum resin. It has extraordinary adhesiveness and extreme pressure resistance. MillGuard was developed primarily for use on heavily loaded bushings, and is ideal for use on severely loaded sugar mill bushings. It contains additives for neutralizing acidity and combating corrosion.

VIEW DETAILS

SurStik® is a high-performance, extreme pressure lubricant formulated to lubricate open gears, dipper sticks and bushings on walking draglines, shovels and drills with outstanding results. It pumps well in cold temperatures, lubricates in the hottest climates, resists dirt contamination and stays on in wet and freezing conditions.

VIEW DETAILS

Designed using the latest technology in extreme pressure/antiwear chemistry, SurStik® 800 is a high-performance, extreme pressure lubricant formulated for use on open gears. It works well in highly loaded components under the most punishing conditions and easily forms a protective film. SurStik 800 is highly resistant to being washed out. Meets Bucyrus specification.

VIEW DETAILS

Surtac® 2000 contains molybdenum disulfide and graphite solid lubricants which provide a durable protective coating without the use of asphalt, solvents or lead. It is suitable for use on dragline open gears, slow moving bearings and bushing. It minimizes metal-to-metal contact and wear. When correctly applied, Surtac 2000 forms a matte, non-greasy film, this makes it particularly useful in very dusty environments.

VIEW DETAILS

BioRail® EP and LF biodegradable rail curve lubricants, prove that you don't have to compromise performance in order to be environmentally responsible. BioRail has proven itself, not only in the laboratory, but where it counts - on the rail. Its stable chemistry ensures that it pumps in the coldest climates and stands up at the wiping bar in all weather conditions. This lubricant provides outstanding gauge-face lubrication on rail curves.

VIEW DETAILS

BioSwitch™ is a biodegradable and clean switch plate oil that protects switch plates from wear. BioSwitch™ has the advantage of being non-staining to hands and clothing. Pourable and sprayable.

VIEW DETAILS

Offering a tough, durable, long-lasting shield of protection, EZ Switch® coats the switch plate and reduces wear. As the switch operates, the coating becomes denser in the contact area, enhancing wear protection. EZ Switch can be applied to wet switches and resists rain; this lubricant becomes more resistant to rain as it dries.

VIEW DETAILS

RailArmor® EP, a high performance rail curve lubricant provides superior protection that extends rail and wheel life and reduces consumption costs. This lubricant raises the bar in critical performance areas, such as rail adhesion, rain resistance, wear protection and carry down from the wiping bar; consumption can be reduced as much as 50%.

VIEW DETAILS

Railmaster® LF is a premium, high performance rail curve grease. It has proven itself in the field as a cost saver to the Rail Industry by doing what rail curve grease is supposed to do. It coats the gage face and protects from wear. Railmaster LP contains molybdenum disulfide to meet the BNSF specfication.

VIEW DETAILS

Railmaster® LFG gives maximum protection to rails and wheel flanges. It is a high performance rail curve grease that contains high grade graphite instead of molybdenum disulfide for economy without loss of performance.

VIEW DETAILS

SwitchArmor® is a dry film lubricant specifically developed for use on rail switches and turnouts. It is formulated to provide a tough, durable and long-lasting shield of protection. SwitchArmor goes on easily, while it forms a protective coating on the switch plate. It is highly resistant to rain and reduces wear.

VIEW DETAILS

Bayonet Adapters replace a standard breather cap on a hydraulic reservoir. Simply remove the breather cap, place the bayonet adapter on the existing flange, and rotate one-quarter turn. No tank modification is required and they accommodate Air Sentry breathers with a 1" NPT connection.

VIEW DETAILS

Domed Flange Adapter Kits provide a low profile yet rugged way to mount a 1" NPT desiccant breather to a hydraulic reservoir. Includes six hole ANSI pattern gasket and fasteners for perfect replacement of bayonet flange and vent cap. The beveled surface directs spills and contaminants away from the opening.

VIEW DETAILS

Drum Adapter Kits allow breathers to be installed on any storage tank or drum; there's never been a cleaner, more effective way to store, filter and pump lubricants from a drum. Unique design ensures all fluid handling is managed through one adapter. Anodized aluminum adapters have quick connects for pumping oil in and out of drum. Single-port access to the oil reduces contamination as drum remains closed. Off-line filtration units easily connect to adapter without ever disrupting the performance of the breather.

VIEW DETAILS

Gearbox Adapter Kits allow breathers to be installed on any gearbox. Oil can be pumped in or out without opening the gearbox to atmosphere. Offline filtration, oil changes and sampling can be handled through the adapter. They are a faster, simpler and cleaner way to handle gear oils and reduce ingression. Available in eight colors to segregate dissimilar fluids, avoiding cross contamination.

VIEW DETAILS

Hydraulic Reservoir Adapter Kits allow breathers to be installed on any hydraulic fluid tank or reservoir. The patent-pending aluminum adapters have quick connects in two sizes for pumping oil in and out, allowing the system to remain closed at all times, dramatically reducing contamination while improving oil-handling safety. Off-line filtration can also be connected through the adapter without ever disrupting the breather or opening the tank.

VIEW DETAILS

The process of collecting oil via an oil sampling port is critical. Without a true sample, oil analysis reports may be inaccurate. Access to the lubricant is done through the use of a sample port adapter. The sample port adapter screws into the sample port of most Air Sentry adapter kits. Oil samples can then be drawn from the system and placed into a clean sampling bottle for analysis, ensuring that the lubricant is never exposed to contamination by opening the equipment.

VIEW DETAILS

Slip Fit Bayonet Adapters replace a standard breather cap on hydraulic reservoirs. Simply remove the breather cap, place the bayonet adapter on the breather flange and rotate one-quarter turn. No tank modification is required.

VIEW DETAILS

Slip Fit Female Threaded Adapters are suitable for use with Air Sentry breathers that have a 1" slip fit connection and are intended for reservoirs or gearboxes with a wall thickness sufficient for a tapped hole. Fits all breathers with slip fit connections.

VIEW DETAILS

Slip Fit Flange Adapters are used with breathers having a 1" slip-fit connection. These adapters are used with reservoirs where the tank wall is not thick enough to allow for tapping threads. With the Model A-101 adapter, mounting holes can be drilled in the high impact ABS molded flange to mate with any required hole pattern. The Model A-114 flange adapter has a standard ANSI 6-hole pattern pre-drilled for mounting. Fits all breathers with slip fit connections.

VIEW DETAILS

Slip Fit Male Threaded Adapters are suitable for use with Air Sentry breathers that have a 1" slip fit connection and are intended for reservoirs or gearboxes with a wall thickness sufficient for a tapped hole. Fits all breathers with slip fit connections.

VIEW DETAILS

Slip Fit Threaded Spin-On Adapters replace the standard spin-on particle filters made by many manufacturers. These adapters fit Air Sentry breathers with 1" slip-fit connections and are available in different sizes and thread configurations. No tank modifications are required. Fits all breathers with slip fit connections.

VIEW DETAILS

The Splash Adapter is an anodized steel adapter available in 1” MNPT and 2” MNPT. It protects the breather from splashing fluids when installed on mobile, off-road, or mining equipment.

VIEW DETAILS

Threaded Metal Adapters fit the X-Series - X-100 breather and any Z-Series breathers. The breather connection is ½" male NPT while a variety of reservoir connection types are available. Fits all Z-Series breathers and X-100.

VIEW DETAILS

D-Series Breathers feature numerous models in a variety of sizes, all designed to satisfy the requirements of most stationary fluid management applications. The breathers provide application flexibility by using 100% silica gel for moisture adsorption, 100% activated carbon for fume and odor control or both, when necessary. All D-Series models feature 2-micron solid particle filtration and are available with airflow ratings of 20 cfm.

VIEW DETAILS

L-Series Breathers are available with 100% silica gel or activated carbon, or a combination of both, as necessary. These breathers include an in-line filter/dryers that remove water vapor and solid contaminants from air exhaust lines, low pressure compressed air lines, vacuum lines, and other in-line airflow applications where clean, dry air is required. Air enters the filter/dryer in one end and is clean and dry when leaving the other end. Water vapor and solid particles down to 2 micron are removed. L-Series is rated up to 60 psi and mounted on the regulated side of the air line.

VIEW DETAILS

M-Series Breathers are designed from heavy-duty materials capable of handling the requirements of the most severe environments. They replace the standard breather cap or vent tube on fuel tanks and fluid reservoirs. Pipe threads on the bottom standpipe make the units easy to install in moments. All M-Series designs have 2 micron pleated filters and silica gel bags that are easily replaced. They also feature the proprietary Splash Sentry™, which prevents foaming or splashing fluids from entering the breather during normal operating conditions.

VIEW DETAILS

R-Series Breathers are ideal for heavy equipment that is productive and on the move and outfitted with hydraulic fluid tanks or reservoirs that breathe in the dirty outside air. This heavy-duty breather series is designed for high-vibration, mobile applications, to include, off-road, construction and farm vehicles. R-Series breathers easily mount in place of standard breather caps by rugged steel pipe threads and a reusable metal base. When the gold silica gel cartridge turns dark green, simply install a new replacement cartridge to keep things moving.

VIEW DETAILS

XR-Series breathers were originally engineered for the wind power industry but are designed to perform in any extreme environment where protection from dust, moisture and vibration is critical. These breathers include a metal reinforced base, available with male NPT threads to adapt to your equipment. The base is designed to handle the rigors of high-vibration applications. The top cap uses two check valves to prevent outside moisture and solid contaminants from entering the breather until there is a need for airflow. The modular design allows for economical replacement of the desiccant cartridge.

VIEW DETAILS

X-Series Breathers are the perfect solution for high humidity and high dust environments. To extend the desiccant's life, the X-Series incorporates two check valves and a reusable top cap. The check valves provide a closed system until airflow is required, extending the service life of the desiccant. Specifically, the intake check valve allows airflow into the breather only when differential pressure between the atmosphere and fluid reservoir exceeds a 0.1-psi threshold, while the exhaust check valve permits air to exit the reservoir when the differential pressure exceeds a 2.0-psi threshold. A 0.1-psi check valve is also available for exhaust. When the gold silica gel cartridge turns dark green, simply install a new replacement cartridge to keep things moving.

VIEW DETAILS

Z-Series breathers are designed for applications where space is limited or air flow requirements are lower than 5 cfm. The Z-Series is typically used on gearboxes and low fluid volume applications where mounting space is limited or where a larger breather will not fit without remote mounting.

VIEW DETAILS

GUARDIAN is Air Sentry's industry leading breather series. Some models feature an isolation check valve that keeps exhaust air from depleting the desiccant and protects from volatile fumes and splashing fluids. The GUARDIAN's casing is constructed from Tritan®, a patented material highly resistant to impact and chemicals with a broad range of operating temperatures. These unique features equate to a longer life for your breather and your equipment.

VIEW DETAILS

The Advanced Bulk System delivers best practice contamination control in a compact and space efficient form. Ideal for organizations that need the superior contamination control, working within budget and/or space constraints.

VIEW DETAILS

OilSafe's ground-breaking Filtration Units extend the life of your industrial oils, saving you time and money. They maintain purity from storage to application and eliminate cross-contamination with color-coded/error-proof, flat face, zero-leak quick connects. The cleanest and safest filtration systems on the market with three layers of spill containment to include a removable primary containment vessel, preventing spills and waste.

VIEW DETAILS

OilSafe's Quick Connects offer a flexible, durable and safe hose interface for use with lubrication management equipment. Manufactured from anodized aluminum, then color-coded, these connects are specially designed to eliminate cross-contamination once and for all. They are available in 10 familiar OilSafe colors to easily identify fluid contents and set the bar with an error-proof/exclusive fit; only two terminals of the same color can fully connect making cross-contamination impossible. OilSafe's Quick Connects keep your machinery and fluids lasting longer while maintaining a safe work environment with precise and secure connections that eliminate leaks, spills and waste.

VIEW DETAILS

When your lubricants are subject to remote or extreme conditions and interior space is limited, OilSafe's Satellite Lube Room offers a stand-alone system with placement flexibility and state-of-the-art features. This convenient storage protects the lubricants quality and lifespan by reducing handling errors and controlling its environment.

VIEW DETAILS

This Tote Dispensing Rack delivers best practice contamination control for common 300 gallon totes in a modular, ergonomic and space efficient form.

VIEW DETAILS

The 4 Way Grease Tool is a handy, dual purpose tool for removing worn and broken grease fittings as well as retapping holes for installing new grease fittings. It works with both straight and angled fittings and is available in small and large sizes for use on almost all threaded fittings. For installing straight grease fittings. Screw extractor for removing worn and broken grease fittings. For installing angled grease fittings. Hardened tap for retapping holes.

VIEW DETAILS

The 4 Way Grease Tool is a handy, dual purpose tool for removing worn and broken grease fittings as well as retapping holes for installing new grease fittings. It works with both straight and angled fittings and is available in small and large sizes for use on almost all threaded fittings. For installing straight grease fittings. Screw extractor for removing worn and broken grease fittings. For installing angled grease fittings. Hardened tap for retapping holes.

VIEW DETAILS

This Cartridge Protection Tube protects grease cartridges against damage and weather to preserve the integrity of the grease and avoid damage to grease cartridges that cause grease gun malfunctions. The tubes provide a clean, safe method of transporting cartridges from the vehicle or shop to the point of use and enables the safe and clean return of used grease cartridges from the worksite or work vehicle for safe and environmentally responsible disposal.

VIEW DETAILS

The Cartridge Tube Hanging Hooks enable color-coded identification of grease cartridges within Cartridge Protection Tubes and provide the ability to hang grease cartridges for ease of access and complete organization in the workplace. Hooks snap easily and securely in place. The hooks are available in OilSafe's standard 10 colors for a broad choice of identification.

VIEW DETAILS

Lever Grip Grease Guns are available in color-coded clear versions. Clear Body Grease Guns - Lever Grip enable accurate identification of a lubricant by providing visibility of the installed cartridge or the grease level if bulk filled. Heavy duty OilSafe grease guns are designed for punishing day in and day out heavy industrial applications. Variable stroke lever action for greater control of delivery, especially in tight working spaces. Match the color-coded grease gun to a OilSafe color-coded Grease Fitting Protector and ensure the right grease is applied to the right equipment

VIEW DETAILS

Pistol and Lever Grip grease guns are also available in color-coded clear versions. Clear grease guns enable accurate identification of a lubricant by providing visibility of the installed cartridge or the grease level if bulk filled. Heavy duty OilSafe grease guns are designed for punishing day-in and day-out heavy industrial applications. Pistol grip grease guns are ideal for one handed operation and prevent fingers from pinching. Designed to use in confined spaces where access to grease fittings is restricted. Match the color-coded grease gun to an OilSafe color-coded Grease Fitting Protector and ensure the right grease is applied to the right equipment.

VIEW DETAILS

Clear Body Tubes are available as spare parts or for converting your existing grease gun. Fits most common styles. Match the color-coded grease gun to an OilSafe color-coded Grease Fitting Protector and ensure the right grease is applied to the right equipment.

VIEW DETAILS

Pistol Grip Grease Guns are ideal for one handed operation. Designed to prevent fingers from pinching and to use in confined spaces where access to grease fittings is restricted. Match the color-coded grease gun to a OilSafe color-coded Grease Fitting Protector and ensure the right grease is applied to the right equipment.

VIEW DETAILS

Grease Fitting Protectors save you the cost of equipment failures related to contamination or misapplication. These protectors provide a secure seal over most common grease fittings providing excellent protection against contamination. Furthermore, with 10 colors and space for labels the grease fitting protectors clearly identify what grease is required for the fitting.

VIEW DETAILS

Grease Fitting Protectors save you the cost of equipment failures related to contamination or misapplication. These protectors provide a secure seal over most common grease fittings providing excellent protection against contamination. Furthermore, with 10 colors and space for labels the grease fitting protectors clearly identify what grease is required for the fitting. These protectors provide a number of benefits over traditional grease fitting protectors

VIEW DETAILS

Grease Fitting Protectors save you the cost of equipment failures related to contamination or misapplication. These protectors provide a secure seal over most common grease fittings providing excellent protection against contamination. Furthermore, with 10 colors and space for labels the grease fitting protectors clearly identify what grease is required for the fitting.

VIEW DETAILS

OilSafe's pre-configured, 3 color Grease Fitting Protector Kit comes in blue, purple and red. This OilSafe color-coded system enables the dedication of a specific color to a specific grease. It includes space for labeling the GFP clearly identifies which grease is required for the fitting.

VIEW DETAILS

OilSafe's pre-configured, 3 color Grease Fitting Protector Kit comes in blue, purple and red. This OilSafe color-coded system enables the dedication of a specific color to a specific grease. It includes space for labeling the GFP clearly identifies which grease is required for the fitting.

VIEW DETAILS

OilSafe's pre-configured, 3 color Grease Fitting Protector Kit comes in blue, purple and red. This OilSafe color-coded system enables the dedication of a specific color to a specific grease. It includes space for labeling the GFP clearly identifies which grease is required for the fitting.

VIEW DETAILS

OilSafe's pre-configured, 6 color Grease Fitting Protector Kit comes in black, blue, mid green, purple, red and yellow. This OilSafe color-coded system enables the dedication of a specific color to a specific grease. It includes space for labeling the GFP clearly identifies which grease is required for the fitting.

VIEW DETAILS

OilSafe's pre-configured, 6 color Grease Fitting Protector Kit comes in black, blue, mid green, purple, red and yellow. This OilSafe color-coded system enables the dedication of a specific color to a specific grease. It includes space for labeling the GFP clearly identifies which grease is required for the fitting.

VIEW DETAILS

The OilSafe's pre-configured, 6 color Grease Fitting Protector Kit comes in black, blue, mid green, purple, red and yellow. This OilSafe color-coded system enables the dedication of a specific color to a specific grease. It includes space for labeling the GFP clearly identifies which grease is required for the fitting.

VIEW DETAILS

OilSafe's pre-configured, 6 color Grease Fitting Protector Kit comes in black, blue, mid green, purple, red and yellow. This OilSafe color-coded system enables the dedication of a specific color to a specific grease. It includes space for labeling the GFP clearly identifies which grease is required for the fitting.

VIEW DETAILS

OilSafe's pre-configured, 6 color Grease Fitting Protector Kit comes in black, blue, mid green, purple, red and Yellow. This OilSafe color-coded system enables the dedication of a specific color to a specific grease. It includes space for labeling the GFP clearly identifies which grease is required for the fitting.

VIEW DETAILS

OilSafe's pre-configured, 6 color Grease Fitting Protector Kit comes in black, blue, mid green, purple, red and yellow. This OilSafe color-coded system enables the dedication of a specific color to a specific grease. It includes space for labeling the GFP clearly identifies which grease is required for the fitting.

VIEW DETAILS

Color-coded Steel Tubes are available in 10 colors as spare parts or for converting your existing grease gun. Fits most common styles. Match the color-coded grease gun to an OilSafe color-coded Grease Fitting Protector and ensure the right grease is applied to the right equipment.

VIEW DETAILS

This Heavy Duty Grease Gun Holder has a simple snap action clamp for safe storage of grease guns and suction guns. Mounts on almost any surface. This heavy duty holder has a strong spring and mechanism that will hold secure in high vibration environments.

VIEW DETAILS

This Grease Gun Holder has a simple snap action clamp for safe storage of grease guns and suction guns. Mounts on almost any surface. Suitable for 14oz (400gm) grease guns.

VIEW DETAILS

This circular color-coded Contents Label is made of durable vinyl and is waterproof and oil resistant. Includes a large white space for adding your own information. Made to fit into OilSafe Cartridge Protection Tubes, they can also be used with other OilSafe components to label lubricants, fluids and anything else in the workplace.

VIEW DETAILS

Clearly identify used oil containers and assist with regulatory compliance with these durable "Used Oil" Polyester Adhesive Labels available in a variety of sizes.

VIEW DETAILS

Color-coded Drum Rings fit securely and easily to all OilSafe Drums and provide clear and effective identification. This ring enables quick and easy removal of the entire labeling assembly from the drum when the drum requires cleaning. Adhesive labels are also available to enable more detailed identification. Options include: the "Contents" Label with space for writing information or create a Custom Label using the Label Wizard.

VIEW DETAILS

Curved to fit OilSafe color-coded Drum Rings, these labels feature a large white space for adding information. Use with other OilSafe components to clearly and accurately label lubricants and fluids. Ensures color-coded identification even when the lid is removed.

VIEW DETAILS

The Drum Label Kit is designed to accompany your color-coded OilSafe Lid, Drum and Label offering an onsite evaluation of the unique OilSafe Visual Lubrication Labeling System.

VIEW DETAILS

Fill Point ID Washers enable durable and comprehensive color-coded identification of machine oil and grease fitting fill points. Washers can be used alone for simple color-coding or combined with OilSafe components allowing for more detailed information at the point of use.

VIEW DETAILS

Fill Point ID Washers enable durable and comprehensive color-coded identification of machine oil and grease fitting fill points. Washers can be used alone for simple color-coding or combined with OilSafe components allowing for more detailed information at the point of use.

VIEW DETAILS

Fill Point ID Washers enable durable and comprehensive color-coded identification of machine oil and grease fitting fill points. Washers can be used alone for simple color-coding or combined with OilSafe components allowing for more detailed information at the point of use.

VIEW DETAILS

Fill Point ID Washers enable durable and comprehensive color-coded identification of machine oil and grease fitting fill points. Washers can be used alone for simple color-coding or combined with OilSafe components allowing for more detailed information at the point of use.

VIEW DETAILS

Fill Point ID Washers enable durable and comprehensive color-coded identification of machine oil and grease fitting fill points. Washers can be used alone for simple color-coding or combined with OilSafe components allowing for more detailed information at the point of use.

VIEW DETAILS

OilSafe's High-Strength Magnets are custom-built magnets that fix label pockets and color-coded label frames to bulk fluid barrels, totes, storage racks, machinery, equipment or any other metal surface. This enables operators to find what they need when they need it while ensuring no misapplication of fluids occurs.

VIEW DETAILS

ID Tabs provide durable, color-coded labeling and fill point identification options when mated with a matching color-coded OilSafe Fill Point ID Washer and 0.5" Label. Easily hang additional information using the hook located on the front of the ID Tab. Creates a highly visual, simple and reliable system for ensuring the right lubricant goes into the right machine every time. Where space is tight or the angle makes the label difficult to read, consider using a Swivel ID Tab.

VIEW DETAILS

ID Washer Label Clamps fit to the color-coded Fill Point ID Washer for comprehensive identification of equipment fill-points, air breathers, auto-lubers and more. Clamp in a Label Pocket and Label Pocket Frame, if desired.

VIEW DETAILS

Label Leashes are used for attaching pockets to containers, machinery, piping and other fittings. Use individually or make a longer leash by connecting multiple leashes together to suit your applications. Unlike traditional cable ties, the Label Leash can be easily removed and reused.

VIEW DETAILS

Double-sided pocket accommodates content labels and card stock, and provides ample space for comprehensive identification information on containers and equipment. Ensure accurate lubricant identification from bulk storage to the point of use. Made to withstand tough outdoor conditions.

VIEW DETAILS

Double-sided pocket accommodates Hazmat, SDS and other information sheets and cards. Ensure accurate lubricant identification from bulk storage to the point of use. Made to withstand tough outdoor conditions.

VIEW DETAILS

Industrial grade, color-coded Label Pocket Frames protect and identify. Labels and Label Pockets insert directly into the Label Pocket Frame creating a highly visual, simple and reliable system for ensuring the right lubricant goes into the right machine every time.

VIEW DETAILS

The clear and durable Label Wrap houses a Label Pocket inserted inside. It enables accurate color-coding and identification of grease guns, auto-lubricators, air breathers, spray cans and other suitably sized cylindrical objects.

VIEW DETAILS

The clear and durable Label Wrap houses a Label Pocket inserted inside. It enables accurate color-coding and identification of grease guns, auto-lubricators, air breathers, spray cans and other suitably sized cylindrical objects.

VIEW DETAILS

Specifically designed for OilSafe containers, the industrial-grade Lockable Drum Ring provides a secure way of attaching the Label Pocket and Frame. Use with multiple Label Pockets and color-coded Frame to identify the container and lubricant, along with other information including SDS and Right to Know.

VIEW DETAILS

This Reusable Pocket Frame Leash is perfect for securing Label Pocket Frames. The head of the leash is designed specifically for securing in the body of the Label Pocket Frame and holding it tight and secure.

VIEW DETAILS

The Swivel Joint ID Tab mates with any size color-coded Washer and a ID Tab to provide durable color-coding and labeling for fill points. Fit a 0.5" label to the recess and use a Lens Cap for extra protection.

VIEW DETAILS

The Swivel Joint Pocket Frame mates with any size color-coded Washer and a Label Pocket Frame to provide adjustable attachment of detailed labeling information at the fill point.

VIEW DETAILS

Tough and comfortable to handle, OilSafe Drums come in 5 different sizes and are fully sealing when fitted to any genuine OilSafe Lid. The drums have an extra wide neck opening (120mm / 4.7") for rapid pouring and easy cleaning. Made of industrial-grade material that withstands the toughest working conditions, the drums are designed to last.

VIEW DETAILS

Tough and comfortable to handle, OilSafe Drums come in 5 different sizes and are fully sealing when fitted to any OilSafe Lid. The drums have an extra wide neck opening (120mm / 4.7") for rapid pouring and easy cleaning. Made of industrial-grade material that withstands the toughest working conditions, the drums are designed to last.

VIEW DETAILS

Tough and comfortable to handle, OilSafe Drums come in 5 different sizes and are fully sealing when fitted to any OilSafe Lid. The drums have an extra wide neck opening (120mm / 4.7") for rapid pouring and easy cleaning. Made of industrial-grade material that withstands the toughest working conditions, the drums are designed to last.

VIEW DETAILS

Tough and comfortable to handle, OilSafe Drums come in 5 different sizes and are fully sealing when fitted to any OilSafe Lid. The drums have an extra wide neck opening (120mm / 4.7") for rapid pouring and easy cleaning. Made of industrial-grade material that withstands the toughest working conditions, the drums are designed to last.

VIEW DETAILS

Tough and comfortable to handle, OilSafe Drums come in 5 different sizes and are fully sealing when fitted to any OilSafe Lid. The drums have an extra wide neck opening (120mm / 4.7") for rapid pouring and easy cleaning. Made of industrial-grade material that withstands the toughest working conditions, the drums are designed to last.

VIEW DETAILS

For use with OilSafe's Premium Pump, this brass fitting provides a secure and long lasting fitting to male quick connect fittings. This adapter enables a secure attachment of the discharge hose when fitted with a female quick connect and provides easy filling of the container with quick connects from bulk storage. Comes complete with pump return port adapter and O-Ring.

VIEW DETAILS

Available as a replacement, these Discharge Hoses screw easily to OilSafe's Standard and Premium Pumps. Anti drip hook outlet – 1/2" opening for discharging lubricants into open fill points.5’ hose. Custom lengths available on request.

VIEW DETAILS

Available as a replacement, these discharge hoses screw easily to OilSafe's Standard and Premium Pumps. Anti drip hook outlet – 1/2" opening for discharging lubricants into open fill points. 10’ hose. Custom lengths available on request.

VIEW DETAILS

InTelliPort™ gives you all the knowledge you need about your industrial fluids without, leaks, cracks and wear. The unique system allows for quick and easy condition assessment of your equipment's vital fluids to help ensure cleanliness. inTelliPort Fluid Analysis Systems withstand harsh environments, including extreme temperatures and a variety of industrial fluids. This glass is up to four times stronger than other acrylic sight glasses; it is shatterproof, stain-proof and chemically resistant.

VIEW DETAILS

inTelliPort™ Sight Glasses withstand harsh environments, including extreme temperatures and a variety of industrial fluids. This glass is up to four times stronger than other acrylic sight glasses; it is shatterproof, stain-proof and chemically resistant.

VIEW DETAILS

The Mini Spout Lid has an outlet diameter of 1/4" (7mm), making it ideal for lubrication jobs where equipment fill holes are small such as constant level oilers and machine tools. Made with state-of-the-art materials, the Mini Spout Lid has an advanced sealing thread design that ensures a secure fit on all genuine OilSafe Drums.

VIEW DETAILS

Replace any or all of the four O-Rings in an OilSafe Mini Spout Lid with this kit. Viton O-Rings provide higher levels of chemical resistance to the standard Nitrile O-Rings fitted in OilSafe products. Replace all four O-Rings in a Mini Spout Lid.

Kit contains (4) Viton O-Rings.

 

SPECIFICATIONS

  • ProductO-Ring Kits - Mini Spout Lid - Viton
  • OilSafe Product TypeTransfer Container Accessories & Spare Parts

VIEW DETAILS

Replace any or all of the four O-Rings in an OilSafe Mini Spout Lid with this kit. Viton O-Rings provide higher levels of chemical resistance to the standard Nitrile O-Rings fitted in OilSafe products. Replace all four O-Rings in a Mini Spout Lid.

VIEW DETAILS

Replace the O-Ring in a Stretch Spout Hose Extension. Viton O-Rings provide higher levels of chemical resistance to the standard Nitrile O-Rings fitted in OilSafe products. Replace all four O-Rings in a Stretch Spout Lid.

VIEW DETAILS

Premium Pump Breathers with a 3 Micron Filter fit to the accessory port on OilSafe Premium Pumps providing protection against airborne contaminants when filling the container via quick connect through the Premium Pump body.

VIEW DETAILS

Premium Pump Breathers with a 10 Micron Filter fit to the accessory port on OilSafe Premium Pumps providing protection against airborne contaminants when filling the container via quick connect through the Premium Pump body.

VIEW DETAILS

Premium Pump Collars are ideal for use with Premium Pumps and come standard as removable color-coded pump collars that support on site identification systems. These pump collars can be replaced for service reasons or should the color of the pump need to be changed.

VIEW DETAILS

Premium Pump Quick Connect Kits for operation with quick connects. This enables the container to be filled by quick connect through the pump body (no need to remove the lid) and also enables attachment to machinery fill points by quick connect via the pump discharge hose. No mess, no contamination oil top ups.

VIEW DETAILS

Premium Pump Quick Connect Kits for operation with quick connects. This enables the container to be filled by quick connect through the pump body (no need to remove the lid) and also enables attachment to machinery fill points by quick connect via the pump discharge hose.

VIEW DETAILS

This Pump Reducer Nozzle accessory fits to the aluminium discharge pipe on the outlet end of the pump hose and reduces the outlet diameter down to approximately ¼”, making oil top offs to very small fill points easy, simple, fast and clean.

VIEW DETAILS

The Standard Pump is a general purpose pump that will handle up to ISO 460 fluids. This high quality down-stroke discharge pump is perfect for quickly and easily accessing hard to reach and time consuming top up points such as gearbox and transmission applications.

VIEW DETAILS

By utilizing the Storage Lid, OilSafe Drums can be pre-filled for safe storage and transport. This Lid is color-coded for easy identification, location and timely access to fluids where and when needed. A convenient alternative to handling bulky 20 liter/US quart drums. Match lid with an OilSafe color-coded label for easy, comprehensive fluid identification.

VIEW DETAILS

The plug and strap ensures that the Stretch Spout Hose Extension is well protected from contaminants when not in use. This flexible Spout Hose attaches to the OilSafe Stretch Spout Lid, making awkward or hard-to-reach fill points easy and fast to access and service.

VIEW DETAILS

OilSafe's Stretch Spout Lid is designed for hard to reach areas and applications where precise pouring of lubricants is required. With a 0.5" opening and longer spout, the Stretch Spout Lid is ideal for lower viscosity oils (less than ISO 220). Made with state-of-the-art materials, the Stretch Spout Lid has an advanced sealing thread design, that ensures a secure fit on all OilSafe Drums. Match lid with an OilSafe color-coded label for easy,

VIEW DETAILS

This flexible Spout Hose Extension attaches to the OilSafe Stumpy Spout Lid, making awkward or hard-to-reach fill points easy and fast to access and service. The addition of the Stumpy Hose Extension to the outlet spout of the Stumpy Spout Lid also eliminates the need for funnels, which are notorious for attracting contaminants. This hose can be removed from the fittings and the length cut to suit the application.

VIEW DETAILS

With a 1" spout opening, the OilSafe Stumpy Spout Lids design is ideal for applications where a higher lubricant flow is required. Made with state-of-the-art materials, the Stumpy Spout Lid has an advanced sealing thread design that ensures a secure fit on all OilSafe Drums. The Stumpy Spout Lid includes a large handle for ease of carrying and a auto-shut off breather valve to avoid accidental spillage or contamination.

VIEW DETAILS

This multi-purpose Utility Lid has a large outlet opening of approx. 2" (48mm), enabling controlled, fast pouring of lubricants. Designed to mate with an OilSafe Standard or Premium Pump on a 3, 5 or 10 liter/US quart drum to take care of hard to reach and time consuming pumping applications such as gearboxes and transmissions

VIEW DETAILS

Get big performance at a great price with our Poly Ramp. The ribbed non-skid surface allows for safe walk-ups and traction loading. Holds up to 1,000 lbs. of UDL weight.

VIEW DETAILS

For easier loading, just hook this multi-purpose Work Ramp onto any of our Spill Decks. The work ramp is small enough to stay out of your way.

VIEW DETAILS

There’s no need to worry about incidental spills on your factory floor. Spill Decks are the easiest to load with a low profile design and optional ramp. Each Spill Deck is designed for stand alone use or can connect with other Spill Decks for a customized work area.

VIEW DETAILS

There’s no need to worry about incidental spills on your factory floor. Spill Decks are the easiest to load with a low profile design and optional ramp. Each Spill Deck is designed for stand alone use or can connect with other Spill Decks for a customized work area.

VIEW DETAILS

There’s no need to worry about incidental spills on your factory floor. Spill Decks are the easiest to load with a low profile design and optional ramp. Each Spill Deck is designed for stand alone use or can connect with other Spill Decks for a customized work area.

VIEW DETAILS

There’s no need to worry about incidental spills on your factory floor. Spill Decks are the easiest to load with a low profile design and optional ramp. Each Spill Deck is designed for stand alone use or can connect with other Spill Decks for a customized work area

VIEW DETAILS

All welded, heavy gauge construction for long life in plant maintenance and industrial applications. Provided with non-slip black matting for the top and with smooth rolling 8" diameter wheels the total load capacity is 3600lbs

VIEW DETAILS

The Large Storage Cabinet will enable you to immediately store, organize and protect all your color-coded OilSafe and other brands lubrication reliability tools in a sturdy, workshop ready storage solution.

VIEW DETAILS

The Medium Storage Cabinet will enable you to immediately store, organize and protect all your color-coded OilSafe and other brands lubrication reliability tools in a sturdy, workshop ready storage solution.

VIEW DETAILS

The Large Work Shop Storage Cabinet will enable you to immediately store, organize and protect all your color-coded OilSafe and other brands lubrication reliability tools in a sturdy, workshop ready storage solution.

VIEW DETAILS
logo