Fleetguard Fuel Filters

  • Fleetguard Fuel Filters
  • Fleetguard Fuel Filters
  • Fleetguard Fuel Filters

The most technologically advanced fuel filtration systems.

Clean, uncontaminated fuel is key to maximum fuel system performance and longevity for modern diesel engines. Without high quality fuel filtration and regularly scheduled service, fuel contamination can lead to costly repairs and engine downtime.

Fleetguard Filters for Mining and Construction Vehicles
Fuel

  • Optimum protection for advanced fuel systems and heavy-duty mining and construction vehicles
  • Reduces operating costs – extended service intervals / up-time
  • Remote-mount fuel refining systems, fuel and water separators and fuel filtration designed exclusively for electronic engines
  • StrataPore™ multi-layered media offer superior micron efficiencies, remove large particles and the smallest debris
  • Meets OEM efficiency requirements; biodiesel compatible to ASTM D6751, EN14214 standards

FH234 - INDUSTRIAL PRO Diesel Fuel Filters - Heavy Duty

Industrial Pro® FH234 Series All-in-one fuel filter, fuel/water separator and fuel heater.

Fleetguard FH234 Diesel Fuel Filter

The FH234 Series is the best fuel processor available to protect your valuable equipment. Rated for diesel fuel flow up to 200 GPH (757 LPH), its extra rugged fuel housing is designed for off-road equipment, construction, agricultural, mobile or stationary applications.

Units can be joined together to meet very high fuel flow requirements – up to 600 GPH (2272 LPH). An optional fuel heater assures that cold weather start is never a problem. The Industrial Pro combines EleMax™ filter technology and multi-layered Stratapore™ media, making it the best fuel/water system on the market today.

» Industrial Pro Spec Sheet

  • On and off-highway mobile or stationary applications
  • Single-housing units rated for fuel flows up to 200 GPH (757 LPH)
  • Dual unit rated up to 400 GPH (1515 LPH)
  • Triple unit rated up to 600 GPH (2272 LPH)
  • Standard non-heated or optional fuel heater
  • Seeing is Believing® filter cover shows filter needs (or doesn’t need) changing.
  • Five-minute NO MESS filter change, no loss of prime
  • Highest performing – filter life up to 3X longer than standard filters

FH230 - FUEL PRO Diesel Fuel Filters - Heavy Duty

Fuel Pro® FH230 Series All-in-one fuel filter, fuel/water separator and heater.

Fleetguard Fuel Pro FH230 Diesel Fuel Filter

  • On and off-highway mining, construction, agriculture, mobile or stationary applications
  • Rated for diesel fuel flow up to 180 GPH (681 LPH)
  • Include standard non-heated options, thermostatically controlled fuel heat, fluid heat and optional pre-heaters (12V DC, 24V DC, 120V AC)
  • Water-In-Fuel (WIF) sensor available
  • Biodiesel compatible to ASTM D6751, EN14214 fuel standards
  • Seeing is Believing® filter cover shows filter needs (or doesn’t need) changing.
  • Easiest filter to maintain: Five-minute NO MESS filter change, no loss of prime
  • Best fuel/water separation available

» Fuel Pro Spec Sheet

FH235 & FH236 - DIESEL PRO Fuel Filters - Medium Duty

Diesel Pro® FH235 & FH236 Series All-in-one fuel filter, fuel/water separator and fuel heater.


  • FH235 Series – Medium Duty
  • Highway trucks, construction, agricultural, mobile or stationary applications
  • Rated for diesel fuel flow up to 90 GPH (341 LPH)
  • Standard non-heated or optional fuel heater
  • Best fuel/water separation available
  • Five-minute NO MESS filter change, no loss of prime
  • Seeing is Believing® filter cover shows filter needs (or doesn’t need) changing.
  • Clear bowl that indicates when to drain
  • Reversible port locations for easy installation
  • FH236 Series – Medium Duty
  • Best used with mid-range engines and refrigerated trailers
  • Rated for diesel fuel flow up to 60 GPH (230 LPH)

FS1000 Fuel Filters for CELECT & Quantum Engines

Today’s modern electronic engines require special protection. Fleetguard’s FS1000™ fuel/water separator with StrataPore™ media inside provides the extra protection needed to handle the extremely tight tolerances of fuel system injection equipment. The FS1000 features a patented self-venting drain valve, which allows all water, both free and emulsified, to drain from the system quickly and efficiently.

FS20000 Slow Release Lubricity-Enhancing Fuel Filtration System

Available in liquid solutions or on-board dosing systems (see F20000 Spec Sheet)

  • Extends fuel system life
  • Reduces fuel pump wear
  • Lowers operating costs
  • Increases engine up-time

This innovative slow release lubricity fuel filtration system was designed to meet the needs of customers who wish to run light fuels in Tier 2 compliant engines. By simply spinning on this filter, a state-of-the art lubricity enhancing fuel additive is consistently released into the fuel system, protecting fuel system components from excessive wear when light fuels are used (Jet A, Kerosene, Winter Fuel Blends-50% No.2/50% No.1 diesels, Low Sulfur Diesel-below 50 ppm sulfur). The FS20000 has a unique thread size to prevent non-chemical filters from mistakenly being used.

Fuel Island Filters & Filter Heads

Ensure cleaner fuel from the storage tank with Fleetguard protection at the source.

Fuel Island Filter
The presence of contaminant-free fuel in the diesel engine is critical to performance and longer fuel system life, especially when using new ULSD fuels and biodiesel blends. Cummins Filtration offers a first line of defense at the fuel storage tank to ensure that the cleanest fuel reaches the engine system.
  • Mining & construction site fueling applications
  • Mobile fuel trucks, overhead and stationary fuel tanks
  • Eliminates contaminants before the fuel enters the engine
  • StrataPore™ synthetic media for finer filtration and wide range of micron ratings
  • Reduced vehicle maintenance costs and increased fuel system life
  • Differential pressure gauge indicates when to replace the filter

» Fuel Island Filter Spec Sheet


Cummins Filter Catalog Cummins filtro Catálogo

» Cummins Filtration Warranty
» La garantía de Cummins Filtration


For filter assistance and ordering, call J&M Parts at +1 786 519 7947 or send us an email.

Order with confidence from J&M Parts.

The J&M Parts Team hold more than 30 years of engineering and hands-on maintenance experience in large mining and construction projects. Throughout the USA, South America and worldwide, choose J&M for reliable parts support, equipment sales, operator training and maintenance programs.

Onsite Parts Installation - Repair - Engineering - Training - Consulting

The J&M Service Team conducts parts installation, rebuilds and retrofits at your construction or mine site. Our multi-lingual team will work with your on-site maintenance employees. We routinely service sites in Latin and South America.

Our parent company MCCI offers productivity consulting, training, on-site engineering and language services in foreign and domestic projects around the globe. MCCI helps industrial customers extend service life, minimize costs, and boost the productivity of their operations.