Mining & Industrial Lubricants

Mining & Industrial Lubricants
J&M Parts is an authorized Whitmore distributor. Call +1 786 519 7947 or send us an email.

Whitmore Industrial Lubricants, Oils, Grease & Degreasers

J&M Parts offers a full range of Whitmore industrial lubrication products, including open gear lubricants, greases, chain and cable lubricants, cleaners and degreasers, HD gear oils, industrial oils, food-grade lubricants, anti-seize compounds and more. Whitmore sets the protection standard for the lubrication industry in the most adverse conditions and demanding environments.

Matrix® EP Grease – GRADE: NLGI 1, 2, 2 (TK)

Multipurpose grease that is highly recommended for difficult applications such as extreme pressure, water, heat, or chemical attack. Can be used to 400°F (200°C).

Applications: Wheel Bearings, Shaker Screens, Suction and Wet End Rolls on Paper Machines, Pellet Mills, Belt Conveyor Pulleys, Slewing Bearings, Ball Joints

Decathlon™ HTC High Temperature Chain Oil – GRADE: ISO 320

High temperature synthetic chain oil that is recommended for use up to 450°F (230°C) and intermittent service up to 550°F (285°C).

Applications: High-Temperature Chains

Envirolube® Open Gear Lubricant – GRADE: Light, Medium, Heavy

Open gear lubricant for use on the most severely loaded open gears such as ball mills. Smooths existing wear damage

Applications: Open Gears, Ball Mills, Kilns

Open Chain Lubricant – GRADE: ISO 32

Suitable for high load. Penetrating action draws the lubricant to the pins and bushings of the chain, where lubrication is most needed. Quickly displaces moisture and contaminants, while preventing rust and corrosion.

Applications: Chain Drives, Wire Ropes

Paragon™ Gold – GRADE: ISO 100, 150, 220, 320, 680, 1000, 1500

High performance gear oil formulated for use where excessive wear and short component life drive up operating costs. Highly recommended where gears have experienced scuffing or pitting damage.

Applications: Gearboxes

Whitmore Mining Lubricants

The excellent reputation of Whitmore mining lubricants is well known. Several different types of lubricants serve the many needs of the mining industry. These include multi-service lubricants, open gear lubricants, extreme pressure lubricants, exposed gear oils, propel machinery lubricants and wire rope lubricants.

Multi-Service Lubricants

Gearmate® 1000 – GRADE: Arctic, Medium, Heavy, Extra Heavy

Multiservice open gear lubricant specially formulated for use on draglines and shovels.

Applications: Open Gears, Sticks, Circle Rails and Rollers, Bushings, Large Heavily Loaded Bearings

SurStik™ 800 – GRADE: Arctic, Medium, Heavy, Extra Heavy

High performance extreme pressure lubricant designed for use on open gears and other highly loaded components under the most punishing conditions and hostile environments.

Applications: Open Gears, Swing Racks, House Rails, House Rollers, Shovel Dipper Sticks, Drum Laggings, Slow Moving Bearings, Propel Bushings

SurStik® – GRADE: Extra Heavy, Summer, Winter

Multiservice and open gear lubricating paste. Particularly useful on shovels as it sticks to dipper handles in all weather conditions. Also used on kilns, ball mills, dryers etc.

Applications: Open Gears, Sticks, Circles Rails, House Rollers, Lower Swing Bearings, Bushings


Open Gear Lubricants

Envirolube® – GRADE: Light, Medium, Heavy

Open gear lubricant for use on the most severely loaded open gears such as ball mills. Smooths existing wear damage.

Applications: Open Gears, Ball Mills, Kilns

BMG-6000™ – GRADE: NLGI 1.5

Open gear grease designed to protect the most severely loaded ball mill gears.

Applications: Open Gears, Ball Mills, Kilns

Surtac® 2000 – GRADE: 2000, 2000 RD, 2000 HD, 2000 XD

Multiservice and open gear lubricating paste for use on draglines and shovels. Also used on kilns, ball mills, dryers etc.

Applications: Swing Racks, House Rails, House Rollers, Wire Ropes, Drum Laggings, Heavily Loaded Bushings and Bearings


Extreme Pressure Greases

Dura-Film™ XD – GRADE: NLGI 0, 1, 2

Calcium sulfonate grease with fully synthetic oil. Pumpable in cold climates.

Applications: Phosphate Processing, Paper Machines, Outdoor Cranes, Earthmoving Equipment, Shaker Screens, Centrifuges, Hammer Mills

Caliber™ M – GRADE: NLGI 0, 1, 2

Lubricating grease that meets the requirements of Caterpillar and Bucyrus International. Caliber 3M contains 3% moly, and 5M contains 5%. Used on draglines, shovels and rolling stock.

Applications: Earthmoving Equipment, Rolling Stock in Temperate Climates

Caliber™ 460 M – GRADE: NLGI 0, 1, 2

Designed to lubricate the components of earthmoving equipment and rolling stock in tropical climates.

Applications: Wheel Bearings, Slewing Bearings, Vehicle Chassis Points and U-Joints, Pivot Points and Bucket Pins on Earthmoving Equipment

Novagard® – GRADE: NLGI 1, 2

Extreme pressure grease that is designed for easy of pumping on mining machines (mainly draglines and shovels) in cold climates.

Applications: Antifriction Bearings, Bushings, Vehicle Chassis Point and U-joints, Pivot Points, Bucket Pins, Earthmoving Equipment


Enclosed Gear Oils

Paragon™ Gold – GRADE: ISO 100, 150, 220, 320, 680, 1000, 1500

High performance gear oil formulated for use where excessive wear and short component life drive up operating costs. Highly recommended where gears have experienced scuffing or pitting damage.

Applications: Gearboxes

Paragon™ – GRADE: ISO 68, 100, 150, 220, 320, 460, 500, 680, 1000, 1500

Heavy-duty enclosed gear oil for use on the most severely loaded gears. Extensive experience in draglines and shovels.

Applications: Gearboxes


Propel Machinery Lubricants

WhitSlide® HV – GRADE: Light, Medium, Heavy

Free of chlorinated solvent. Formulated to lubricate the slide mechanisms on Bucyrus 2500 series draglines and higher. No overheating!

Applications: Walking Mechanism Slides, Heavily Loaded Bushings

WhitCam®

For lubrication of Monighan cams found on Bucyrus draglines. Can be applied using swing arm automatic system. Also available in plastic bags for hand application.

Applications: Monighan Cams


Wire Rope Lubricants

Drag Rope Lubricant HF

Forms a dense film on wire ropes that protects the outer strands. For use on dragline drag ropes and other ropes where wear occurs primarily on the outside.

Applications: Wire Ropes

Wire Rope Lubricant – GRADE: ISO 22

Chain and cable lubricant with very low surface tension for maximum penetration. Used primarily on draglines and shovels but also in general industrial wire rope applications. Also suitable as a penetrating chain lubricant.

Applications: Wire Ropes


Order from J&M with confidence.

The J&M Parts Team hold more than 30 years of engineering and hands-on maintenance experience in large mining and construction projects. Throughout the USA, South America and worldwide, customers rely on timely J&M parts support, equipment sales, training, and scheduled maintenance programs.

On-site Parts Installation and Equipment Repair

The J&M Service Team conducts parts installation, rebuilds and retrofits at your construction or mine site. Our multi-lingual team will work with your on-site maintenance employees. We routinely service sites in Latin and South America.

Our parent company MCCI offers productivity consulting, training, on-site engineering and language services in foreign and domestic projects around the globe. MCCI helps industrial customers extend service life, minimize costs, and boost the productivity of their operations.